Board-Level Specialists

Micro Soldering Canberra
PCB and Circuit Board Repair

Microsoldering, also written micro soldering, is board-level repair under a microscope: we replace or reconnect tiny components and rebuild damaged traces on a circuit board. We do it in-house at our Franklin workshop in Canberra, and you can post a board to us from anywhere in Australia.

  • Backed by 400+ Five-Star Google Reviews
  • In-House Microscope Work
  • Australia-Wide by Mail-In

Drop It Off or Post It

Bring your device or board to our Franklin workshop by appointment, or post it from anywhere in Australia. We assess it and send a written quote.

Seki Gadgets at a Glance

  • 2020Repairing Since
  • 1,200+Repair Jobs
  • 400+Five-Star Google Reviews
  • 1 WeekGenerally From Arrival

Boards We Take

What We Micro Solder

We take all kinds of circuit boards and small electronics, subject to our Terms and Conditions.

We do the soldering only: the board should arrive disassembled, with any parts supplied.

  • Bare PCBs
  • Car ECUs
  • Connectors
  • BGA Chips
  • PCB Trace Repair
  • Battery Terminals and Contacts
  • Game Cartridges
  • Key Fobs and Remotes
  • Garage Door and Gate Remotes
  • Vintage Electronics and Radios
  • Remote-Control Vehicle Boards
  • ASUS ROG Handhelds

A bare PCB arrives with nothing fitted, and we install its chips, capacitors and diodes.

On a car ECU (engine control unit), capacitors can blow, and we replace them.

We also microsolder the motherboards of ASUS ROG handhelds and laptops, typically a battery connector. We do not offer general laptop repair.

What We Do Not Repair

Circuit Boards

PCB Repair and Circuit Board Repair

Our PCB repair services cover printed circuit board repairs at component level, under the microscope. A PCB holds a device’s chips and connectors, joined by fine copper traces, and one failed part or broken trace can stop the whole device. We also offer PCB soldering: fitting chips, capacitors and diodes to bare PCBs that arrive with nothing on them.

Need PCB repairs in Canberra? We replace failed connectors and chips, including BGA chips that sit on tiny solder balls, and blown capacitors on car ECUs. We also rebuild broken traces and lifted pads, and repair game cartridges.

For PCB repair support, tell us the fault and the device the board came from.

Fees and Turnaround

What It Costs and How Long It Takes

Microsoldering work has a minimum service charge of $65, so short jobs cover our time. Larger jobs are quoted in writing after we assess the board.

How Your Fees Work

Minimum service charge
$65
Larger jobs
Quoted in writing
Parts, disassembly and reassembly
Extra fees apply
Return postage (mail-in only)
Flat rate on every mail-in device

Fees current as at November 2026.

What's Included

What a Microsoldering Job Covers

Here is what is included, and what is arranged separately.

  • Component-level microsoldering under the microscope, done in-house
  • A written quote you approve before work starts
  • The warranty for your device type
  • Tracked, signed return for mail-in boards

Arranged Separately, With Extra Fees

Backed by Our Warranty

Microsoldering on other devices, such as a bare PCB or a game cartridge, carries a 30-day warranty. Microsoldering workmanship on phones, tablets and consoles, done on their own pages, carries our lifetime warranty, and genuine board-level parts we fit carry lifetime cover on parts and labour. Liquid damage and physical damage are not covered, and parts you supply carry no parts warranty.

Start a Repair

Tell Us About Your Board

Use the form below to tell us the fault and the device or board it came from. When it arrives, we assess it and send a written quote.

Please also tell us if the device has been liquid damaged or has had an earlier repair attempt.

Microsoldering Enquiry
We need a mobile number on every enquiry, for example 04XX XXX XXX.
Choose the closest match. If yours is not listed, choose the last option.
Tell us what the item does or does not do, and when it started.

We do not take liquid-damaged devices for microsoldering. You can still send your enquiry, and tell us what happened in the fault box.

If yes, tell us what was tried in the fault box.
Workshop visits are strictly by appointment.
Optional. Images only (JPG or PNG), up to 3 photos, 10 MB each. Photograph the board only, with no people or screens showing personal details.

If your photo will not upload, it may be a HEIC photo. Try taking a new photo, or choose a JPG or PNG copy of it. Photos are optional, so you can also send your enquiry without them.

Why Choose Us

Microscope Work, Done In-House

Our certified technicians do every microsoldering job at our own Franklin bench.

  • In-House Board-Level Specialists

    We specialise in component-level microsoldering, done in-house. That covers BGA rework, chip and connector replacement, and rebuilding broken traces and lifted pads. We work under the microscope, restoring a failed connection at the board itself.

  • Precision Equipment

    Precision work needs the right tools. Our bench has a temperature-controlled soldering station, a hot-air rework station, a PCB preheater and a trinocular microscope. Together they let us work on small joints and limit the heat reaching nearby components.

  • Workmanship Warranty

    Microsoldering on other devices, such as bare PCBs and cartridges, carries a 30-day warranty. Workmanship on phones, tablets and consoles carries our lifetime warranty, and genuine board-level parts we fit carry lifetime cover on parts and labour. Parts you supply carry no parts warranty, and liquid or physical damage is not covered.

  • Sustainable Choices

    Repairing one failed component can keep a whole device out of landfill. When a single part is the problem, we repair that part rather than replacing the entire board. It keeps devices in use for longer.

  • Certified Technicians

    Our certified technicians are trained in microsoldering, BGA rework and circuit board repair. We have completed 1,200+ repair jobs, and that hands-on experience goes into every board. Each job gets the patience this work demands.

  • You Approve the Quote

    We assess your board under the microscope, then send a written quote. No work starts until you approve it. The minimum service charge is on this page, and extra fees for disassembly or sourcing parts are disclosed before work begins.

Inside Our Franklin Workshop

Every microsoldering job is done at our own bench in Franklin, as part of the wider electronics repair service we have offered since 2020.

How It Works

Four Steps From Your Board to Back in Hand

  1. Step 1:Prepare Your Device

    Your Part

    The device should arrive fully disassembled, with replacement parts supplied. We can take it apart or source parts for an extra fee.

  2. Step 2:Bring It In or Post It

    Your Choice

    Visit our Franklin workshop by appointment, or post it to us from anywhere in Australia.

  3. Step 3:Assessment and Written Quote

    You Decide

    We assess the board under the microscope and send a written quote. No work starts until you approve it.

  4. Step 4:Microsolder and Return

    Generally 1 Week

    We microsolder your board. Collect it by appointment, or we post it back, tracked and signed.

Before You Send Your Device

Microsoldering carries real risk: other functions can be lost, a device may not turn on again, and we cannot guarantee success. Our Terms and Conditions set this out.

Questions & Answers

Micro Soldering FAQs

What is microsoldering?

Microsoldering is soldering done under a microscope on parts too small to handle by hand, such as the chips, connectors and traces on a circuit board. It is also written micro soldering. At Seki Gadgets in Canberra we microsolder bare PCBs, car ECUs, remotes and other boards in-house.

What is the difference between soldering and microsoldering?

The difference is scale: soldering joins larger parts, such as wires and big connectors, with a soldering iron, while microsoldering works on tiny parts under a microscope with hot air and fine-tip tools. We offer circuit board soldering as microsoldering only, so we do not offer soldering for cables or wiring harnesses.

How much does micro soldering cost in Canberra?

Micro soldering repairs at Seki Gadgets in Canberra have a minimum service charge of $65, so short jobs cover our time. Larger jobs are quoted in writing after we assess the board, and no work starts until you approve the quote. Extra fees apply if we take the device apart or source parts for you.

How long does micro soldering take?

Micro soldering at Seki Gadgets is generally done within 1 week of your device arriving with us, whether you bring it to our Franklin workshop or post it. Express Service is not available for microsoldering, and if you post your board, add Australia Post transit time.

What warranty do you offer on microsoldering repairs?

Microsoldering on other devices, such as bare PCBs and game cartridges, carries a 30-day warranty. On phones, tablets and consoles, microsoldering workmanship carries our lifetime warranty, and genuine board-level parts we fit carry lifetime cover on parts and labour. Liquid and physical damage are not covered, and parts you supply carry no parts warranty. See our warranty terms.

What PCB and circuit board repairs can you do?

We repair all kinds of circuit boards, subject to our Terms and Conditions. PCB board repair at component level covers fitting parts to bare PCBs, replacing blown capacitors on car ECUs, and repairing connectors, BGA chips, traces, game cartridges and remotes. We do not offer cable soldering or wiring harnesses, and we do not take liquid-damaged devices.

Where can I get micro soldering done in Canberra?

You can get micro soldering done at our Franklin workshop in Canberra, by appointment only, or by post from anywhere in Australia. We are at Unit 83/51 Nullarbor Ave, Franklin ACT 2913, in the Woolworths Metro complex opposite the Nullarbor Ave Light Rail Station, with appointments Monday to Friday, 10 am to 6 pm.

Can I post a circuit board to you from outside Canberra?

Yes. We take circuit boards by post from anywhere in Australia and return them tracked and signed, with flat return postage. Tell us about your board, then read how to post your device. We send a written quote once we have assessed it, and the work is generally done within 1 week of arrival.

Do I need to take my device apart or supply the parts?

Ideally, yes. Our microsoldering service is the soldering work only, so the device should arrive fully disassembled, with any replacement parts supplied by you. If we have to disassemble, reassemble or source parts, extra fees apply. Tell us the fault and the device or board it came from, and we send a written quote after we assess it.

Can you repair a board after a failed repair attempt?

Yes. We welcome DIY repairers, with no judgement if a project did not work out. Tell us what was tried when you message us, as an earlier attempt can complicate the job and may change the quote. We do not take phones, tablets or game consoles with an earlier microsoldering attempt.

Which devices and faults do you not micro solder?

We do not micro solder large items or household appliances, such as dishwashers, or cables and wiring harnesses. A charging port repair is a normal repair, not a microsoldering job, so for a phone or tablet charging port see our phone repair or tablet repair pages.

Do you replace batteries in game cartridges like Pokemon Emerald?

Yes. We microsolder game cartridges, including replacing the internal save battery in cartridges such as Pokemon Emerald. Cartridge work is generally done within 1 week of arrival and carries a 30-day warranty. Tell us the title and fault, and we confirm whether you supply the battery or we source it for a fee.

Real Reviews

What Our Repair Customers Say

Backed by 400+ five-star Google reviews.

Yang Chen

September 11, 2026

Google brand logo
Star rating
I highly recommend Shaun and Seki Gadgets for his high quality and super fast service at short notice. Shaun completed my small micro-soldering job within minutes to a very high top standard, even strengthening the joint for preventing future mishaps. He deserves 6 stars out of 5. Awesome champion!

Chloe Woods

May 28, 2026

Google brand logo
Star rating
My daughter broken the aerial off our baby monitor and Shaun from Seki Gadgets had it fixed within 24 hours from drop off and works perfectly. Absolutely recommend

Michael D

May 14, 2026

Google brand logo
Star rating
Completed a micro soldering job swiftly and very clearly know what they are doing. Great customer service.

S C

April 7, 2026

Google brand logo
Star rating
Great service, great price. I had a USB-C connector replaced at Seki and it the turnaround was fast and the service was great.

Julian O’Rourke

March 14, 2026

Google brand logo
Star rating
Absolutely amazing work performed by Shaun, he resurrected this blu-ray drive from the dead! He re-did two traces on the pcb and soldered a new USB-Micro b on. Very fast turn around and I am very happy with the outcome. Highly recommend this shop for micro soldering repairs.

Steven Stolk

March 13, 2026

Google brand logo
Star rating
Fantastic service! I needed an unusual microsoldering job and Shaun was great. And to top it off, just a 1 day turnaround. I have to add that Seki’s booking system and communications are second to none. Thanks Seki!

Mitch McLoughlin

February 17, 2026

Google brand logo
Star rating
Accidentally ripped off the battery connector on an ASUS ROG ALLY X (2024) when attempting to disconnect the battery.Took it to Seki Gadgets and spoke with Shaun, who was refreshingly upfront about pricing and repair timeframes before I had the device in his hands.Shaun was incredibly quick and professional with his diagnostic and repair. Diagnosis was painless and Shaun explained the issues in easy-to-understand language (this one required micro-trace and pad repair). Repair was just as quick and painless with regular updates and photos during the process. Collection post-repair was easy to arrange and attend, with the device being returned bubble-wrapped for its freshness and safety.Suberb experience, and I will definitely return with any PCB/microsolder repairs I cause in future.TL;DR: Excellent customer care, relatively painless drop off/collection process, and incredible value for money. Seki Gadgets is an easy recommendation for anyone in Canberra who needs their small electronics/consoles repaired.

Zachary Cash

February 17, 2026

Google brand logo
Star rating
5 Star Service, a DIY gone wrong resulting in stripping the connector pads from my laptop motherboard for the battery. A quick online form submission, next day drop off, and it assessed, repaired and returned over a weekend and now my laptop charging, using and reporting the battery properly again. Will be returning for any future required repairs.

Syed Rahman

February 5, 2026

Google brand logo
Star rating
Seki Gadgets fixed multiple units for me with micro soldering. Very happy with Shaun’s work.

Canberra and Australia-Wide

Micro Soldering in Canberra and Across Australia

Looking for microsoldering near me in Canberra? We do all our micro soldering in-house at our Franklin workshop in Canberra, in the Woolworths Metro complex opposite the Nullarbor Ave Light Rail Station. Visits are by appointment only.

Not in Canberra? We offer micro soldering Australia-wide through our mail-in service. Send your board from Sydney, Melbourne, Brisbane, Perth or anywhere else, and the work is generally done within 1 week of your device arriving. We post it back tracked and signed, with flat return postage on every mail-in device. Express Service is not available for microsoldering.

  • Australian Capital Territory

    Local workshop
    • Canberra
    • Gungahlin
    • Belconnen
    • Woden
    • Tuggeranong
  • New South Wales

    • Sydney
    • Newcastle
    • Wollongong
    • Queanbeyan
    • Goulburn
    • Wagga Wagga
  • Victoria

    • Melbourne
    • Geelong
    • Ballarat
    • Bendigo
  • Queensland

    • Brisbane
    • Gold Coast
    • Sunshine Coast
    • Townsville
    • Cairns
  • South Australia

    • Adelaide
    • Mount Gambier
    • Whyalla
  • Western Australia

    • Perth
    • Mandurah
    • Bunbury
    • Geraldton
  • Tasmania

    • Hobart
    • Launceston
    • Devonport
  • Northern Territory

    • Darwin
    • Alice Springs
    • Katherine

Keep Exploring

Related Services and Guides

  • iPhone and iPad Logic Board Repair

    Dead, restarting or a black screen? We repair the failed component on your iPhone or iPad logic board.

  • iPhone and iPad Data Recovery

    Photos and files back from a dead or liquid-damaged iPhone or iPad, recovered in-house.

  • PS5 HDMI Port Repair

    We microsolder a genuine HDMI port onto your PS5 and test the HDMI chip behind it. Lifetime warranty, Australia-wide mail-in.

  • Phone Repair Canberra

    Screens, batteries, charging ports and more, repaired at our Franklin workshop or by mail-in.

Ready to Send Us Your Board?

Tell us about your board and the fault, and we send a written quote after assessing it. Questions first? Read our FAQ.

Backed by 400+ five-star Google reviews